5-Axis CNC Machining
Our DN Solutions DVF 5000 5-axis machining centre and Mazak VTC-800/30SR let us machine complex geometries in a single setup, reducing re-clamping errors and lead times.
01
Simultaneous 5-axis with Ø 500 mm tilting rotary table
02
Travels up to 3000×800×720 mm for large parts
03
48-tool magazine, rotary B-axis
04
From prototype to medium batch, tolerances down to ±0.005 mm
02 /
Inside the process
5-axis milling is our flagship capability: complex surfaces, undercuts and multi-face parts machined in a single cycle. The result: fewer setups, fewer cumulative errors, parts that pass inspection first time.
The DVF 5000 machines in simultaneous 5-axis mode: the tilting rotary table orients the part while the spindle cuts, reaching inclined surfaces, undercuts and compound-angle bores without re-clamping. For large parts, the Mazak VTC-800/30SR offers 3 metres of X travel and a rotary B-axis. CAM programming is done in-house: from STEP model to optimised toolpath, everything under our control.
Technical capabilities
- Axes
- simultaneous 5-axis
- Max travels
- 3,000 × 800 × 720 mm
- Tilting rotary table
- Ø 500 mm
- Tool magazine
- 48 positions
- Tolerances
- down to ±0.005 mm
- Batch size
- prototype → medium series
Frequently asked questions
Fewer setups: the part is machined on multiple faces in one cycle. The result: better geometric tolerances, shorter lead times and lower costs on complex parts.
Travels up to 3,000 × 800 × 720 mm on the Mazak centre; on the 5-axis, parts up to roughly Ø 500 mm on the tilting rotary table.
Yes, with dedicated hard-milling strategies and tooling; the most critical surfaces are finished by grinding.
Have a drawing to produce?
Send us the PDF and STEP file for a fast, accurate quotation.